Back

PEMD Scale-up: Strand 1, adopting manufacturing best practice UK registered businesses can apply for a share of up to £5 million to scale up manufacturing in the power electronics, machines and drives supply chain. This strand will fund feasibility studies for innovative manufacturing solutions from other sectors. Eligibility This competition is open to collaborations only. To lead a project your organisation must be a UK registered business of any size.

Programme: Innovate Uk

Award:

Opens: 21 September 2022

Closes: 7 December 2022

Description

Drivers such as climate change, supply chain resilience and the cost of energy mean that there is a growing need to invest in manufacturing efficiency, particularly across the Power Electronics Machines and Drives (PEMD) value chain.

Innovate UK’s Driving the Electric Revolution, part of UK Research and Innovation, will invest up to £5 million in projects that enable the scale-up of PEMD manufacturing to develop a resilient, cross-sectoral, UK supply chain for these enabling technologies critical for net zero.

This competition is split into two strands:

Strand 1 (this strand): Adopting manufacturing best practice, which aims to fund feasibility studies that facilitate the transfer of knowledge, solutions, technologies and best practice from other manufacturing sectors and demonstrate the impact of these innovations on the PEMD supply chain.

Strand 2: Manufacturing process development

It is your responsibility to ensure you submit your application to the correct strand for your project. You will not be able to transfer your application and it will not be sent for assessment if it is out of scope.

In applying to this competition, you are entering into a competitive process. This competition closes at 11am UK time on the deadline stated.

Funding type

Grant

Project size

Your project’s total grant funding request must be between £50,000 and £400,000.

Who can apply

Your project

Your project must:

  • have a grant funding request between £50,000 and £400,000
  • start by 1 May 2023
  • last between 6 and 12 months
  • carry out all of its project work in the UK
  • intend to exploit the results from or in the UK

You must only include eligible project costs in your application.

Under current restrictions, this competition will not fund any procurement, commercial, business development or supply chain activity with any Russian or Belarusian entity as lead, partner or subcontractor. This includes any goods or services originating from a Russian or Belarusian source.

If your total project’s grant funding request or duration falls outside of our eligibility criteria, you must provide justification by email to support@iuk.ukri.org at least 10 working days before the competition closes. We will decide whether to approve your request. If you have not requested approval or your application has not been approved by us, you will be made ineligible. Your application will then not be sent for assessment.

Lead organisation

To lead a project your organisation must:

  • be a UK registered business of any size
  • collaborate with other UK registered organisations

Academic institutions and research technology organisations RTOs cannot lead.


Project team

To collaborate with the lead, your organisation must be one of the following UK registered:

Each partner organisation must be invited into the Innovation Funding Service by the lead to collaborate on a project. Once accepted, partners will be asked to login or to create an account and enter their own project costs into the Innovation Funding Service.

The lead and at least one other organisation must claim funding by entering their costs during the application.

Your project can include partners that do not receive any of this competition’s funding, for example non-UK businesses. Their costs will count towards the total project costs.

Subcontractors

Subcontractors are allowed in this competition, but are limited to no more than 20% of your organisation’s total eligible costs.

Subcontractors can be from anywhere in the UK and you must select them through your usual procurement process.

You can use subcontractors from overseas but must make the case in your application as to why you could not use suppliers from the UK.

You must provide a detailed rationale, evidence of the potential UK contractors you approached and the reasons why they were unable to work with you. We will not accept a cheaper cost as a sufficient reason to use an overseas subcontractor.

All subcontractor costs must be justified and appropriate to the total project costs.


Number of applications

A business can be involved in up to three applications across both strands of the competition. They can lead on a maximum of one application in each strand.

An academic institution, research and technology organisation (RTO), charity, not for profit or public sector organisation cannot lead on any applications but can collaborate on any number of applications across the two strands.

Previous applications

You cannot use a previously submitted application to apply for this competition.

We will not award you funding if you have:

Subsidy control (and State aid where applicable)

This competition provides funding in line with the UK's obligations and commitments to Subsidy Control. Further information about the UK Subsidy Control requirements can be found within the EU-UK Trade and Cooperation agreement and the subsequent guidance from the department of Business, Energy and Industrial Strategy (BEIS).

Innovate UK is unable to award organisations that are considered to be in financial difficulty. We will conduct financial viability and eligibility tests to confirm this is not the case following the application stage.

EU State aid rules now only apply in limited circumstances. Please see our general guidance to check if these rules apply to your organisation.


Further Information

If you are unsure about your obligations under the UK Subsidy Control regime or the State aid rules, you should take independent legal advice. We are unable to advise on individual eligibility or legal obligations.

You must at all times make sure that the funding awarded to you is compliant with all current Subsidy Control legislation applicable in the United Kingdom.


This aims to regulate any advantage granted by a public sector body which threatens to, or actually distorts competition in the United Kingdom or any other country or countries.

If there are any changes to the above requirements that mean we need to change the terms of this competition, we will tell you as soon as possible.

Funding

Up to £5 million has been allocated to fund innovation projects in this competition. Funding will be in the form of a grant.

If the majority of your organisation’s work on the project is commercial or economic, your funding request must not exceed the limits below. These limits apply even if your organisation normally acts non-economically.

For feasibility studies, you could get funding for your eligible project costs of:

  • up to 70% if you are a micro or small organisation
  • up to 60% if you are a medium sized organisation
  • up to 50% if you are a large organisation

For more information on company sizes, please refer to the company accounts guidance. This is a change from the EU definition unless you are applying under State aid.

If you are applying for an award funded under State aid Regulations, the definitions are set out in the European Commission Recommendation of 6 May 2003.

Research participation

The research organisations undertaking non-economic activity as part of the project can share up to 30% of the total eligible project costs. If your consortium contains more than one research organisation undertaking non-economic activity, this maximum is shared between them.

Of that 30% you could get funding for your eligible project costs of up to:

  • 80% of full economic costs (FEC) if you are a Je-S registered institution such as an academic
  • 100% of your project costs if you are an RTO, charity, not for profit organisation, public sector organisation or research organisation

Make An Enquiry
Live chat
Password Reset
Please enter your e-mail address. You will receive a new password via e-mail.